TODO » History » Version 1
Danny, 11/30/2022 07:36 PM
| 1 | 1 | Danny | h1. TODO |
|---|---|---|---|
| 2 | |||
| 3 | h3. Infrastructure |
||
| 4 | |||
| 5 | # -Set up repo and get WC established on workstation- |
||
| 6 | # Fix the DNS so bushidosoftware.com works with the Redmine instance |
||
| 7 | # -Configure Redmine to allow public access to the project wiki- |
||
| 8 | # **Fix solvespace to allow variables to be defined and used in dimensioning formulae |
||
| 9 | |||
| 10 | h3. Prebuild |
||
| 11 | |||
| 12 | # Organize the Shop |
||
| 13 | ## Get machine shop in SE corner |
||
| 14 | ## Finish wiring small room lights |
||
| 15 | ## Get workbenches into small room |
||
| 16 | ## Finish wiring carriage lights and N wall |
||
| 17 | ## Add 220V drops to machine shop area |
||
| 18 | ## Insulate N wall and finish drywall there |
||
| 19 | # Sort out milling machine |
||
| 20 | ## Power |
||
| 21 | ## Collet(s) |
||
| 22 | # Finish muller build |
||
| 23 | # Build grinder |
||
| 24 | # Fix wheels on welding table |
||
| 25 | # Build crane ( source:/gantry.crane/0.assembly.slvs ) |
||
| 26 | |||
| 27 | h3. Build |
||
| 28 | |||
| 29 | # Decide if a Samurai's drivetrain is strong enough as a base for this build |
||
| 30 | a. If not, decide what vehicle to use |
||
| 31 | # Acquire donor vehicle(s) |
||
| 32 | a. Determine hydraulic motor required to power the drivetrain |
||
| 33 | b. Determine hydraulic pump required to drive the hydraulic motor |
||
| 34 | c. Decide if second hydraulic pump is required for steering, boom operation, and auxiliary features |
||
| 35 | d. Determine the engine required to drive the hydraulic pump(s) |